Home

How Do You Make Pour-Over Coffee?

To make pour-over coffee, place ground coffee in a paper-lined dripper and pour hot water over it slowly, allowing the brewed coffee to drain into a cup or server. Start with 20 grams of coffee and 320 grams of water, then adjust the grind and pouring technique to suit your brewer and taste.

What Equipment Do You Need?

You need a pour-over dripper, a matching paper filter, a cup or server, and a kettle. Choose a dripper large enough for the amount you want to brew, and check that it sits securely on your cup. Filters should match the brewer’s shape and size so they fit properly without folding over or blocking drainage.

A digital scale makes the process much easier to repeat. A model that reads in grams is sufficient because you can weigh both the coffee and the water as you brew. Measuring grounds with a spoon is less consistent because different beans and grind sizes occupy different amounts of space.

A burr grinder helps produce evenly sized particles, which makes extraction more predictable. A narrow-spout kettle gives you better control over water flow, but an ordinary kettle can work if you pour gently. If you buy preground coffee, ask for a grind suited to your particular pour-over brewer rather than espresso or French press.

Choose Your Coffee, Grind, and Water

Use coffee you enjoy drinking, preferably ground shortly before brewing. Whole beans retain their flavour longer than ground coffee, so grind only the amount you need. Keep the remaining beans in a tightly closed container away from heat and direct light.

Start with a medium-fine grind for a typical cone-shaped brewer, or a medium grind for many flat-bottom brewers. These are starting points rather than fixed rules because filter thickness, brewer design, and batch size all affect drainage. The grounds should look clearly granular rather than powdery.

Use water that tastes pleasant on its own. Strong chlorine flavours or very hard water can make the finished coffee less appealing, while distilled water alone often produces a less balanced cup. Filtered tap water is a practical option when your tap water has an unpleasant taste.

A water temperature of about 92 to 96°C is a useful starting range. Lighter roasts often benefit from the hotter end, while darker roasts may taste better with slightly cooler water. Without a thermometer, let freshly boiled water stand briefly before pouring, understanding that its temperature will depend on the kettle and the amount of water inside.

Use a Reliable Coffee-to-Water Ratio

Begin with one part coffee to 16 parts water by weight. For a single generous serving, that means 20 grams of coffee and 320 grams of brewing water. For a smaller cup, try 15 grams of coffee and 240 grams of water.

The water measurement refers to what you pour onto the grounds, not the amount of coffee collected below. Some water stays in the coffee bed and filter, so the finished drink will weigh less. Heat extra water for rinsing the filter, but do not include that rinse water in your brewing total.

If the coffee tastes balanced but too strong, use a little more water next time or add a small amount of hot water to the finished drink. If it tastes balanced but too weak, try slightly more coffee for the same amount of brewing water. Change one variable at a time so you can identify what helped.

How to Brew Pour-Over Coffee Step by Step

  1. Rinse the filter. Place it in the dripper and wet it thoroughly with hot water. This helps it sit against the brewer and warms the cup or server. Discard all the rinse water.
  2. Add the coffee. Put 20 grams of ground coffee into the filter and gently shake the dripper to level the bed. Set the brewer on your scale and reset it to zero.
  3. Wet the grounds. Start a timer and pour about 50 grams of water evenly over the coffee. Give the brewer a gentle swirl if you see dry patches, then wait roughly 30 to 45 seconds. This initial wetting, called the bloom, allows trapped gas to escape.
  4. Continue pouring. Add water slowly in small circles, mostly over the coffee rather than directly onto the paper. Pour in two or three stages until the scale reads 320 grams, allowing the water level to fall somewhat between additions without leaving the bed exposed.
  5. Let it drain. Allow the remaining water to pass through, then remove the dripper and stir the brewed coffee. Many small brews finish in roughly three to four minutes, but taste matters more than hitting a particular time.

Adjust the Taste of Your Next Cup

If the coffee tastes sharply sour or thin and drains quickly, try a slightly finer grind. If it tastes harsh or drying and drains very slowly, try a slightly coarser grind. These are useful clues, not guarantees: roast level, water, and uneven pouring can produce similar problems.

Keep your pouring gentle and consistent rather than stirring repeatedly or pouring from a great height. Excessive agitation can move fine particles into the filter and slow drainage. Record your coffee dose, water amount, grind setting, and one short tasting note, then make a single small adjustment for the next brew.