Home

How to Make Coffee with a Coffee Press

To make coffee with a coffee press, combine coarsely ground coffee with hot water, steep for about four minutes, then press the plunger down slowly and pour. Start with 30 grams of coffee and 500 millilitres of water at about 93°C, then adjust the strength and steeping time to suit your taste.

What do you need to make coffee in a coffee press?

A coffee press, also called a French press or cafetière, lets you brew coffee by soaking the grounds directly in water. Its metal mesh filter keeps most of the grounds out of your drink but lets oils and some fine particles through, giving you a fuller texture than paper-filtered coffee.

You'll need a press with an intact beaker and a snug-fitting filter, coffee, a kettle, a timer and a spoon. A digital kitchen scale helps you get consistent results. If you use a glass press, choose a wooden or silicone spoon to avoid tapping the glass with metal.

Choose a coarse, even grind, with particles roughly the size of coarse sand rather than powder. A burr grinder gives you more control over particle size. If you buy ground coffee, ask for a French press grind. You can use any roast level, so choose beans with flavours you already enjoy.

How much coffee should you use?

Start with a 1:16 to 1:17 ratio of coffee to water by weight. That means one gram of coffee for every 16 to 17 grams of water. For kitchen measurements, one millilitre of water weighs approximately one gram.

  • For one modest serving, use 15 grams of coffee and 250 millilitres of water.
  • For two modest servings, use 30 grams of coffee and 500 millilitres of water.
  • For a larger batch, use 45 grams of coffee and 750 millilitres of water, provided your press has enough room.

Leave space above the water so the grounds can swell and you can fit the lid without spilling coffee. Don't rely on the manufacturer's cup count: a press labelled as holding several cups may give you far fewer full-sized mugs.

If you don't have a scale, start with roughly two level tablespoons of coarse grounds per 180 millilitres of water. Spoon measurements vary with grind and roast, so treat this as an approximation. For stronger coffee, use slightly more coffee rather than automatically letting it steep longer.

What temperature should the water be?

Aim for 90°C to 96°C, in line with guidance from the National Coffee Association. Start near the upper end for light roasts and nearer the lower end for dark roasts, then adjust if your coffee tastes too sharp or harsh.

If your kettle doesn't display the temperature, bring the water to a boil and let the bubbling stop before pouring. A brief rest gives you a practical starting point, but you won't get an exact temperature because kettles and water volumes differ.

Use fresh drinking water that tastes good on its own. If your tap water has a noticeable chlorine taste, try filtered water. Preheat the press with warm water, then empty it before adding coffee. Avoid sudden temperature changes if you have a glass beaker.

How to make coffee with a coffee press

  1. Add the measured grounds. Put your coffee in the empty, preheated press. Set the press on a stable, level surface and start your timer as you begin pouring.
  2. Pour in the measured hot water. Wet all the grounds, leaving enough space below the rim. You can skip the separate bloom, or initial small pour, with this immersion brewing method.
  3. Stir gently. Give the mixture one or two slow stirs to break up any dry pockets and wet the grounds evenly.
  4. Fit the lid and let the coffee steep. Keep the plunger raised above the coffee and brew for about four minutes, timing from when you started pouring.
  5. Press down slowly. Hold the handle firmly and lower the plunger with steady, gentle pressure. Stop just above the settled grounds rather than squeezing them against the bottom.
  6. Pour the coffee promptly. Pour into cups or transfer the whole batch to a separate jug. Pour gently and leave the last small, silty portion behind if you prefer a cleaner cup.

Never force the plunger. If you feel resistance, stop, lift it slightly and try again gently. You may struggle to press the plunger if your grounds are too fine, you've overfilled the beaker or the filter is blocked. Forcing it increases the risk of spilling hot coffee.

How to fix weak, bitter or gritty coffee

If your coffee tastes thin but otherwise pleasant, use slightly more grounds next time. If it tastes sour or underdeveloped, try a slightly finer grind, hotter water or a longer steep. Change only one variable per brew so you can tell what helped.

For harsh, bitter coffee, try a slightly coarser grind or a shorter steep. With dark roasts, you may also get better results with water closer to the lower end of the temperature range. The roast itself affects flavour too: changing how you brew won't remove a strongly smoky flavour from the beans.

You can expect a little sediment with a mesh filter. For less grit, use a more consistent grind, plunge gently and avoid disturbing the settled grounds when you pour. Check that the filter fits snugly against the beaker and replace it if the mesh is torn.

How to clean your coffee press

Let the press cool before removing the grounds. Scoop them into a suitable food-waste container or household bin rather than washing them down the sink, where they can contribute to blockages.

Wash the beaker, lid and plunger with warm water and washing-up liquid after each use. Regularly take the filter components apart, following the manufacturer's instructions, to remove trapped grounds and oily residue. Rinse thoroughly and let every part dry before putting the press back together. Only put parts in the dishwasher if the manufacturer says they're dishwasher-safe.